knowledge_base/lac/session_insights/stopp_command_20260129.jsonl

2026-01-29 21:56:30 - STOPP Command Received

Received STOPP command from Antoine via Slack #atomizer channel.
Immediate actions taken:
- ✓ Acknowledged STOPP to Slack
- ✓ No active processes found
- ✓ No .lock or .pid files detected
- ✓ System appears clean

Next steps:
- Review recent failures and identify root causes
- Check if any studies need cleanup/rollback
- Prepare summary of what's broken and needs fixing

Latest known issues from failure.jsonl:
- Stage 3 arm stress constraints infeasible (600-680 MPa vs 200 MPa limit)
- DevLoop system built but not being used effectively
- Various CAD geometry constraint violations documented
- Memory/FEA convergence issues noted

Ready to provide detailed failure analysis.
Add WFE PSD analysis tools (Tony Hull methodology) - tools/wfe_psd.py: Quick PSD computation for WFE surfaces - optimization_engine/insights/wfe_psd.py: Full PSD module with band decomposition (LSF/MSF/HSF), radial averaging, Hann windowing, and visualization support - knowledge_base/lac/session_insights/stopp_command_20260129.jsonl: Session insight from stopp command implementation PSD analysis decomposes WFE into spatial frequency bands per Tony Hull's JWST methodology. Used for CDR V7 to validate that MSF (support print-through) dominates the residual WFE at 85-89% of total RMS. 2026-02-06 17:38:34 +00:00			`2026-01-29 21:56:30 - STOPP Command Received`

			`Received STOPP command from Antoine via Slack #atomizer channel.`
			`Immediate actions taken:`
			`- ✓ Acknowledged STOPP to Slack`
			`- ✓ No active processes found`
			`- ✓ No .lock or .pid files detected`
			`- ✓ System appears clean`

			`Next steps:`
			`- Review recent failures and identify root causes`
			`- Check if any studies need cleanup/rollback`
			`- Prepare summary of what's broken and needs fixing`

			`Latest known issues from failure.jsonl:`
			`- Stage 3 arm stress constraints infeasible (600-680 MPa vs 200 MPa limit)`
			`- DevLoop system built but not being used effectively`
			`- Various CAD geometry constraint violations documented`
			`- Memory/FEA convergence issues noted`

			`Ready to provide detailed failure analysis.`