Atomizer/projects/gigabit-m1-frame-stiffness/studies/01_sensitivity_method_d/atomizer_spec.json

{
  "meta": {
    "version": "2.0",
    "created": "2026-03-04T12:00:00Z",
    "modified": "2026-03-04T12:00:00Z",
    "created_by": "mario",
    "modified_by": "mario",
    "study_name": "01_sensitivity_method_d",
    "description": "Method D — Unit displacement sensitivity map. Apply +1 μm prescribed displacement at each unique interface point (3 points × 3 DOF = 9 runs), extract Zernike WFE sensitivity coefficients. Uses symmetry: V_left≡V_right, L_left≡L_right.",
    "tags": ["mirror", "zernike", "sensitivity", "frame-stiffness", "parametric"]
  },
  "model": {
    "sim": {
      "path": "ASSY_M1_assyfem1_sim1.sim",
      "solver": "nastran",
      "_note": "UPDATE: Set correct .sim filename after model drop"
    },
    "nx_settings": {
      "nx_install_path": "C:\\Program Files\\Siemens\\DesigncenterNX2512",
      "simulation_timeout_s": 600,
      "_note": "UPDATE: Adjust NX path for your machine if different"
    }
  },
  "design_variables": [
    {
      "id": "dv_001",
      "name": "dV1_X",
      "expression_name": "dV1_X",
      "type": "continuous",
      "bounds": {"min": 0.0, "max": 0.001},
      "baseline": 0.0,
      "units": "mm",
      "enabled": true,
      "description": "V_top displacement in global X (0 = fixed, 0.001 = +1 μm)"
    },
    {
      "id": "dv_002",
      "name": "dV1_Y",
      "expression_name": "dV1_Y",
      "type": "continuous",
      "bounds": {"min": 0.0, "max": 0.001},
      "baseline": 0.0,
      "units": "mm",
      "enabled": true,
      "description": "V_top displacement in global Y"
    },
    {
      "id": "dv_003",
      "name": "dV1_Z",
      "expression_name": "dV1_Z",
      "type": "continuous",
      "bounds": {"min": 0.0, "max": 0.001},
      "baseline": 0.0,
      "units": "mm",
      "enabled": true,
      "description": "V_top displacement in global Z (optical axis)"
    },
    {
      "id": "dv_004",
      "name": "dV2_X",
      "expression_name": "dV2_X",
      "type": "continuous",
      "bounds": {"min": 0.0, "max": 0.001},
      "baseline": 0.0,
      "units": "mm",
      "enabled": true,
      "description": "V_side (left) displacement in global X"
    },
    {
      "id": "dv_005",
      "name": "dV2_Y",
      "expression_name": "dV2_Y",
      "type": "continuous",
      "bounds": {"min": 0.0, "max": 0.001},
      "baseline": 0.0,
      "units": "mm",
      "enabled": true,
      "description": "V_side (left) displacement in global Y"
    },
    {
      "id": "dv_006",
      "name": "dV2_Z",
      "expression_name": "dV2_Z",
      "type": "continuous",
      "bounds": {"min": 0.0, "max": 0.001},
      "baseline": 0.0,
      "units": "mm",
      "enabled": true,
      "description": "V_side (left) displacement in global Z"
    },
    {
      "id": "dv_007",
      "name": "dL1_X",
      "expression_name": "dL1_X",
      "type": "continuous",
      "bounds": {"min": 0.0, "max": 0.001},
      "baseline": 0.0,
      "units": "mm",
      "enabled": true,
      "description": "L_side (left) displacement in global X"
    },
    {
      "id": "dv_008",
      "name": "dL1_Y",
      "expression_name": "dL1_Y",
      "type": "continuous",
      "bounds": {"min": 0.0, "max": 0.001},
      "baseline": 0.0,
      "units": "mm",
      "enabled": true,
      "description": "L_side (left) displacement in global Y"
    },
    {
      "id": "dv_009",
      "name": "dL1_Z",
      "expression_name": "dL1_Z",
      "type": "continuous",
      "bounds": {"min": 0.0, "max": 0.001},
      "baseline": 0.0,
      "units": "mm",
      "enabled": true,
      "description": "L_side (left) displacement in global Z"
    }
  ],
  "extractors": [
    {
      "id": "ext_001",
      "name": "Zernike Annular OPD — WFE Sensitivity",
      "type": "zernike_opd",
      "builtin": true,
      "config": {
        "inner_radius_mm": 135.75,
        "outer_radius_mm": 500.0,
        "n_modes": 50,
        "filter_low_orders": 4,
        "displacement_unit": "mm",
        "reference_subcase": 2,
        "_note": "J5+ filtered RMS. reference_subcase=2 is 20° elevation. Check subcase numbering in your model."
      },
      "outputs": [
        {
          "name": "rel_filtered_rms_40_vs_20",
          "metric": "filtered_rms_nm"
        },
        {
          "name": "rel_filtered_rms_60_vs_20",
          "metric": "filtered_rms_nm"
        }
      ]
    }
  ],
  "objectives": [
    {
      "id": "obj_001",
      "name": "ΔWFE at 60° (primary — worst case)",
      "direction": "minimize",
      "weight": 1.0,
      "source": {
        "extractor_id": "ext_001",
        "output_name": "rel_filtered_rms_60_vs_20"
      },
      "target": 1.0,
      "units": "nm",
      "_note": "This is a parametric study, not optimization. Objective is for tracking only."
    }
  ],
  "constraints": [],
  "optimization": {
    "algorithm": {
      "type": "GridSampler",
      "config": {
        "_note": "GridSampler for deterministic parametric sweep. Each run is a specific point in the design matrix."
      }
    },
    "budget": {
      "max_trials": 12
    },
    "_run_matrix_note": "Override with explicit trial list below. Each trial activates exactly ONE displacement expression = 0.001, rest = 0."
  },
  "run_matrix": {
    "_description": "Explicit trial definitions for Method D. Each row is one FEA run. Atomizer sets these expression values before solving.",
    "trials": [
      {"trial": 0, "label": "baseline_all_fixed", "dV1_X": 0, "dV1_Y": 0, "dV1_Z": 0, "dV2_X": 0, "dV2_Y": 0, "dV2_Z": 0, "dL1_X": 0, "dL1_Y": 0, "dL1_Z": 0, "elevation": "60"},
      {"trial": 1, "label": "V_top_Z",  "dV1_X": 0, "dV1_Y": 0, "dV1_Z": 0.001, "dV2_X": 0, "dV2_Y": 0, "dV2_Z": 0, "dL1_X": 0, "dL1_Y": 0, "dL1_Z": 0, "elevation": "60"},
      {"trial": 2, "label": "V_top_X",  "dV1_X": 0.001, "dV1_Y": 0, "dV1_Z": 0, "dV2_X": 0, "dV2_Y": 0, "dV2_Z": 0, "dL1_X": 0, "dL1_Y": 0, "dL1_Z": 0, "elevation": "60"},
      {"trial": 3, "label": "V_top_Y",  "dV1_X": 0, "dV1_Y": 0.001, "dV1_Z": 0, "dV2_X": 0, "dV2_Y": 0, "dV2_Z": 0, "dL1_X": 0, "dL1_Y": 0, "dL1_Z": 0, "elevation": "60"},
      {"trial": 4, "label": "V_side_Z", "dV1_X": 0, "dV1_Y": 0, "dV1_Z": 0, "dV2_X": 0, "dV2_Y": 0, "dV2_Z": 0.001, "dL1_X": 0, "dL1_Y": 0, "dL1_Z": 0, "elevation": "60"},
      {"trial": 5, "label": "V_side_X", "dV1_X": 0, "dV1_Y": 0, "dV1_Z": 0, "dV2_X": 0.001, "dV2_Y": 0, "dV2_Z": 0, "dL1_X": 0, "dL1_Y": 0, "dL1_Z": 0, "elevation": "60"},
      {"trial": 6, "label": "V_side_Y", "dV1_X": 0, "dV1_Y": 0, "dV1_Z": 0, "dV2_X": 0, "dV2_Y": 0.001, "dV2_Z": 0, "dL1_X": 0, "dL1_Y": 0, "dL1_Z": 0, "elevation": "60"},
      {"trial": 7, "label": "L_side_Z", "dV1_X": 0, "dV1_Y": 0, "dV1_Z": 0, "dV2_X": 0, "dV2_Y": 0, "dV2_Z": 0, "dL1_X": 0, "dL1_Y": 0, "dL1_Z": 0.001, "elevation": "60"},
      {"trial": 8, "label": "L_side_X", "dV1_X": 0, "dV1_Y": 0, "dV1_Z": 0, "dV2_X": 0, "dV2_Y": 0, "dV2_Z": 0, "dL1_X": 0.001, "dL1_Y": 0, "dL1_Z": 0, "elevation": "60"},
      {"trial": 9, "label": "L_side_Y", "dV1_X": 0, "dV1_Y": 0, "dV1_Z": 0, "dV2_X": 0, "dV2_Y": 0, "dV2_Z": 0, "dL1_X": 0, "dL1_Y": 0.001, "dL1_Z": 0, "elevation": "60"},
      {"trial": 10, "label": "spot_check_40_top1", "dV1_X": 0, "dV1_Y": 0, "dV1_Z": 0.001, "dV2_X": 0, "dV2_Y": 0, "dV2_Z": 0, "dL1_X": 0, "dL1_Y": 0, "dL1_Z": 0, "elevation": "40", "_note": "Repeat top sensitive DOF at 40° — UPDATE label after ranking"},
      {"trial": 11, "label": "spot_check_40_top2", "dV1_X": 0, "dV1_Y": 0, "dV1_Z": 0, "dV2_X": 0, "dV2_Y": 0, "dV2_Z": 0.001, "dL1_X": 0, "dL1_Y": 0, "dL1_Z": 0, "elevation": "40", "_note": "UPDATE after ranking"}
    ]
  }
}