60 lines
3.2 KiB
Markdown
60 lines
3.2 KiB
Markdown
|
# Steel — AISI 1005
|
|||
|
|
|
|||
|
|
**Status:** Baseline material confirmed (Gen 002)
|
|||
|
|
**NX Material Name:** "beam material" (inherited by thin shell property)
|
|||
|
|
|
|||
|
|
---
|
|||
|
|
|
|||
|
|
## Properties
|
|||
|
|
|
|||
|
|
| Property | Value | Units | Source | Confidence |
|
|||
|
|
|----------|-------|-------|--------|------------|
|
|||
|
|
| Standard | AISI / SAE | — | KBS session | ✅ Confirmed |
|
|||
|
|
| Grade | **1005** | — | KBS session ("NSE steel 10 or 5" = ANSI Steel 1005) | ✅ Confirmed |
|
|||
|
|
| Density | **7.3** | g/cm³ (7,300 kg/m³) | KBS session — Antoine stated directly | ✅ Confirmed |
|
|||
|
|
| E (Young's modulus) | ~200 | GPa | Typical for AISI 1005 — **needs NX verification** | 🟡 Estimated |
|
|||
|
|
| Yield strength | ~285 | MPa | Typical for AISI 1005 (cold-drawn) — **needs NX verification** | 🟡 Estimated |
|
|||
|
|
| UTS | ~330 | MPa | Typical for AISI 1005 — **needs NX verification** | 🟡 Estimated |
|
|||
|
|
| Poisson's ratio | ~0.29 | — | Typical for carbon steel — **needs NX verification** | 🟡 Estimated |
|
|||
|
|
| Elongation | ~20 | % | Typical for AISI 1005 — **needs verification** | 🟡 Estimated |
|
|||
|
|
|
|||
|
|
## Notes on AISI 1005
|
|||
|
|
|
|||
|
|
- AISI 1005 is a **low-carbon plain steel** (0.06% max C) in the 10xx series
|
|||
|
|
- Commonly used for structural applications — good weldability, moderate strength
|
|||
|
|
- NX material library designation may vary (Antoine said "NSE steel 10 or 5" which maps to ANSI/AISI Steel 1005)
|
|||
|
|
- **Density note:** Antoine stated 7.3 g/cm³. Standard steel is 7.85 g/cm³. The 7.3 value may be the NX library default or a specific setting. This affects mass calculation directly.
|
|||
|
|
|
|||
|
|
## Stress Allowable
|
|||
|
|
|
|||
|
|
| Parameter | Value | Basis | Status |
|
|||
|
|
|-----------|-------|-------|--------|
|
|||
|
|
| Stress constraint | 130 MPa | From intake — Gap G9 | 🟡 Not yet confirmed for Gen 002 |
|
|||
|
|
| Implied safety factor | ~2.2 | vs. 285 MPa yield (estimated) | Conservative |
|
|||
|
|
|
|||
|
|
> ⚠️ Need to confirm whether the 130 MPa stress limit from Gen 001 intake still applies given the mass discrepancy resolution. The 130 MPa may have been set for the ~974 kg model.
|
|||
|
|
|
|||
|
|
## Future Material Expansion
|
|||
|
|
|
|||
|
|
Antoine explicitly requested future material support (KBS session 20260210-163801):
|
|||
|
|
|
|||
|
|
| Material | Standard | Priority | Notes |
|
|||
|
|
|----------|----------|----------|-------|
|
|||
|
|
| **Aluminum 6061** | — | Future | Antoine: "change this type of material for aluminum, 6061" |
|
|||
|
|
| **Stainless Steel ANSI 310** | ANSI 310 | Future | Antoine: "stainless steel. ANSI, let's say 310" |
|
|||
|
|
|
|||
|
|
> Antoine's instruction: "Don't start with [these]. Just add this as a future expansion for the optimization process."
|
|||
|
|
|
|||
|
|
### Material Expansion Implications
|
|||
|
|
|
|||
|
|
- Multi-material optimization would change the problem fundamentally:
|
|||
|
|
- Different E, ρ, σ_y for each material → different optimal geometries
|
|||
|
|
- Could be handled as a categorical DV or separate optimization runs per material
|
|||
|
|
- Aluminum 6061: E ≈ 69 GPa, ρ ≈ 2.7 g/cm³, σ_y ≈ 276 MPa — lighter but much less stiff
|
|||
|
|
- SS 310: E ≈ 200 GPa, ρ ≈ 8.0 g/cm³, σ_y ≈ 205 MPa — heavier, similar stiffness, lower yield
|
|||
|
|
|
|||
|
|
## History
|
|||
|
|
|
|||
|
|
- **Gen 001** (2026-02-09): Placeholder — only knew "Steel (AISI)"
|
|||
|
|
- **Gen 002** (2026-02-10): Confirmed AISI 1005 from KBS session. Density confirmed 7.3 g/cm³. Future materials flagged (Al 6061, SS 310). Typical mechanical properties added (pending NX verification).
|