Atomizer/projects/gigabit-m1-frame-stiffness/studies/01_sensitivity_method_d

Study 01 — Sensitivity Map (Method D)

Type: Parametric — Prescribed Unit Displacements Runs: 12 (9 unique @ 60° + 1 baseline + 2 spot checks @ 40°) Model: Enforced displacement BCs with expression control

What This Does

Applies +1 μm displacement at each unique interface point in each global DOF direction, one at a time. Measures ΔWFE to build a sensitivity matrix: nm WFE per μm displacement per DOF per point.

This is the PRIMARY deliverable for StarSpec.

.sim Setup Required

1. Create 9 NX expressions: dV1_X, dV1_Y, dV1_Z, dV2_X, dV2_Y, dV2_Z, dL1_X, dL1_Y, dL1_Z (all default = 0)
2. Apply enforced displacement BCs on all 5 support nodes referencing these expressions
3. Symmetry ties: V_right X = −dV2_X, L_right X = −dL1_X; Y/Z same sign as left counterpart
4. Gravity load at target elevation (60° or 40°)

Extractor

Zernike annular OPD: 50 modes, J5+ filtered, inner_radius = 135.75 mm, reference subcase = 20° elevation.

Also extract individually: J9, J10 (trefoil) and J11 (spherical) for secondary reporting.

Output

Sensitivity matrix → feed into displacement limits and StarSpec deliverable.