52 lines
2.0 KiB
JSON
52 lines
2.0 KiB
JSON
{
|
|
"schema_version": "machine-capabilities.v1",
|
|
"machine_id": "fullum-alpha",
|
|
"machine_family": "swing-arm",
|
|
"machine_name": "Fullum Swing-Arm Polisher",
|
|
"controller_version": "polisher-control/0.1.0",
|
|
"last_verified": "2026-06-01T00:00:00Z",
|
|
"supported_motion_families": ["swing-arm-rosette"],
|
|
"force_range_n": [5, 200],
|
|
"table_rpm_range": [0.5, 10.0],
|
|
"spindle_rpm_range": [10, 120],
|
|
"cam_amplitude_range_deg": [1.0, 31.3],
|
|
"cam_offset_range_deg": [-30.0, 30.0],
|
|
"force_modulation": {
|
|
"supported": true,
|
|
"max_harmonics": 3,
|
|
"max_amplitude_n": 24.0,
|
|
"notes": "m=2 astigmatism and m=3 trefoil are proven channels. m=1 coma is unreliable (score 0.09)."
|
|
},
|
|
"supported_dither_profiles": ["none", "default"],
|
|
"segment_duration_limits": {
|
|
"min_s": 30,
|
|
"max_s": 7200
|
|
},
|
|
"pause_resume_support": true,
|
|
"telemetry_channels": [
|
|
{ "name": "table_rpm", "unit": "RPM", "sample_rate_hz": 100 },
|
|
{ "name": "spindle_rpm", "unit": "RPM", "sample_rate_hz": 100 },
|
|
{ "name": "force_n", "unit": "N", "sample_rate_hz": 100 },
|
|
{ "name": "arm_angle_deg", "unit": "degrees", "sample_rate_hz": 100 },
|
|
{ "name": "table_angle_deg", "unit": "degrees", "sample_rate_hz": 100 },
|
|
{ "name": "timestamp_ms", "unit": "ms", "sample_rate_hz": 100 }
|
|
],
|
|
"safety_limits": {
|
|
"max_force_n": 200,
|
|
"max_table_rpm": 10.0,
|
|
"max_spindle_rpm": 120,
|
|
"notes": "Force hard-limited by load cell interlock. RPM limits are VFD/servo configured."
|
|
},
|
|
"known_constraints": [
|
|
"Cam amplitude is not servo-programmable — must be set mechanically before run.",
|
|
"Force modulation bandwidth limited to ~5 Hz by actuator response.",
|
|
"Table encoder is absolute but may have 1-2 count jitter.",
|
|
"Serial interface to Teensy limits command update rate to ~50 Hz effective."
|
|
],
|
|
"unknowns": [
|
|
"Exact force modulation phase accuracy at m=3 harmonic — not yet validated on hardware.",
|
|
"Thermal drift effect on force sensor over runs longer than 1 hour.",
|
|
"Arm pivot play magnitude under varying force loads."
|
|
]
|
|
}
|